Cadmium tolerance in six poplar species

Selection of poplar species with greater Cd tolerance and exploiting the physiological mechanisms involved in Cd tolerance are crucial for application of these species to phyto-remediation. The aim of this study is to investigate variation in Cd tolerance among the six poplar species and its underlying physiological mechanisms. Cuttings of six Populus species were cultivated for 10 weeks before exposure to either 0 or 200 μM CdSO₄ for 20 days. Gas exchange in mature leaves was determined by a portable photosynthesis system. Cd concentrations in tissues were analyzed by a flame atomic absorbance spectrometry. Subsequently, Cd amount per plant, bio-concentration factor (BCF) and translocation factor (T _f) were calculated. Nonenzymatic compounds and activities of antioxidative enzymes in tissues were analyzed spectrophotometrically. Cd exposure caused decline in photosynthesis in four poplar species including Populus cathayana (zhonghua 1). Among the six species, P. cathayana (zhonghua 1) displayed the highest Cd concentrations in tissues, the largest Cd amount in aerial parts, the highest BCF in aerial parts and T _f under Cd exposure. Under Cd stress, increases in total soluble sugars in roots but decreases in starch in roots, wood, and leaves of P. cathayana (zhonghua 1) were found. Induced O ₂ ^?? and H₂O₂ production in roots and leaves, and increases in free proline, soluble phenolics, and activities of antioxidative enzymes were observed in P. cathayana (zhonghua 1). Based on results of this pot experiment, it is concluded that P. cathayana (zhonghua 1) is superior to other five species for Cd phyto-remediation, and its well-coordinated physiological changes under Cd exposure confer the great Cd tolerance of this species.     

碘掺杂Ti02可见光光催化性能研究

在低于100℃温度条件下，采用溶胶一凝胶法以钛酸正丁酯为钛源，碘酸钾为碘源，制备了I掺杂纳米TiO2催化剂（I-TiO2），运用x-射线衍射（XRD）、透射电镜（TEM）及x-射线光电子能谱（XPS）等对催化剂进行表征，结果表明，TiO2及I-TiO2催化剂均为锐钛矿，I吸附并包裹在TiO2表面或以间隙进入的形式存在，并未进入TiO2晶格。通过在可见光照射下（A〉420nm）以罗丹明B（RhodamineB，RhB）的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能，结果表明，掺杂比为n1：n^ti=0．05：l，焙烧温度为400℃，降解介质条件pH=7时，l-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱（IR），总有机碳（TOC）跟踪测定，比较了TiO2掺杂前后降解RhB和对氯苯酚（4-CP）的光催化特性差异；同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种，表明在可见光下，I-TiO2光催化体系中产生·OH高活性氧化物种从而氧化降解目标化合物。     

零价铁类Fenton试剂氧化降解废水中有机污染物的研究进展

综述了近年来国内外Fe0类Fenton试剂氧化反应降解废水中有机污染物的研究现状，介绍了Fe0-H2O2体系、紫外光-Fe0-H2O2体系和可见光-Fe0-H2O2体系处理有机污染物的机理、特点和效果，并对未来Fe0类Fenton试剂氧化反应体系处理有机污染物的发展前景进行了展望。     

pH、溶解氧、叶绿素a之间相关性研究Ⅱ：非养殖水体

利用国内、外近20年的资料和饮用水水源地潘家口水库现场围隔实验结果,分析非养殖水体中pH、溶解氧（DO）和叶绿素a之间的相互关系。结果表明,当水体处于富营养化状态即叶绿素a平均含量高于10μg/L时,pH、DO与叶绿素a呈显著正相关。当叶绿素a平均含量低于10μg/L时,水体交换强或有机重污染的天然水体中DO与叶绿素a...     

混合酶强化剩余污泥微生物燃料电池性能

为了提高剩余污泥为燃料的微生物燃料电池(SMFC)产电性能以及污泥减量化效果,在不同的温度(40、45和50℃)研究单室无膜微生物燃料电池中酶对SMFC产电特性的强化效果.加入单一酶(蛋白酶或α-淀粉酶)的结果表明,随着温度的上升,SMFC功率密度均上升,但40℃时强化效果最明显,与加入失活酶的对照组相比分别增加198％和130％.在40℃下,混合酶比(蛋白酶浓度:淀粉酶浓度)为2∶3时,SMFC最大功率密度为776 mW/m2.随着混合酶中淀粉酶的比例提高,SMFC库伦效率逐渐增加,当混合酶比为4∶1时,CE(库伦效率)可达18.3％,同时TCOD、TSS和VSS去除率分别为70.3％、66.7％和80.4％.因此,温度相对较低时,外加酶强化效果更明显;与单种酶相比,混合酶对SMFC产电性能和污泥减量化的强化效果更显著.     

羟基铝及复合改性蒙脱石对As(V)的去除性能

采用无机羟基铝及阳离子表面活性剂十六烷基三甲基溴化铵对天然蒙脱石进行无机及复合改性。在吸附过程中研究了反应时间、投加量和pH等变量对吸附性能的影响,同时进行吸附动力学及吸附等温线研究,吸附规律符合Langmuir等温方程式。采用X射线衍射、X射线荧光、傅里叶红外光谱等表征手段对未改性及改性蒙脱石进行性能表征。研究结果表明,羟基铝及复合改性蒙脱石对As(V)具有良好的吸附性能,在pH为4～10,初始砷浓度为2 mg/L,改性蒙脱石对As(V)的去除率接近99%。吸附机理主要为羟基铝表面络合吸附和静电吸附。     

介质阻挡放电对湖泊水华蓝藻的去除

采用介质阻挡放电等离子体技术去除太湖水华蓝藻,考察了放电输出功率、空气流速、添加剂(异丙醇、腐植酸)等对蓝藻去除的影响。结果表明,介质阻挡放电能去除太湖水华蓝藻,放电功率100 W,空气流速1.0 L/min,放电18min,在光照强度2 000 lx和25℃下培养4 d,初始叶绿素a浓度为9.58 mg/L藻液中蓝藻去除率达87.8%。增加放电输出功率和空气流速能提高蓝藻的去除效率;腐植酸促进了介质阻挡放电对蓝藻的去除;而异丙醇添加剂抑制了介质阻挡放电的作用。放电处理后,蓝藻细胞内类胡萝卜素含量、SOD活性、MDA含量发生明显变化,介质阻挡放电破坏了蓝藻细胞内含物。     

利用城市污泥堆肥及建筑弃土种植麦冬研究

将污泥堆肥产品分别与建筑弃土按0%、10%、20%、30%、40%和50%(湿重)的比例配制营养土,以麦冬为例进行180 d的栽培实验,分析了营养土对麦冬生长特性、植物体内及栽培土壤中营养学指标和重金属含量的变化规律,并通过模糊综合评价方法选择营养土较佳配制方案。实验结果表明:堆肥比例在50%时麦冬生物量增加率、新生芽数及地表部分比重为最大值,在30%时纺锤体肉质数减少率为最大值;随着营养土中堆肥比例增加,麦冬体内养分含量、重金属积累量随之增加,均在50%时达到最大值;栽培土壤养分越多损失量越多,各指残留率越低,同时全磷、全氮及K含量降低率较有效磷、碱解氮小得多,Cr降低率在5.20%～8.34%之间,Zn降低率在3.27%～17.35%之间;堆肥比例在40%以上的营养土对麦冬生长效果好,但较佳配制方案为堆肥产品占20%。     

基于Monte-Carlo方法的静电除尘器除尘效率

针对经典除尘效率未考虑诸多随机因素影响的问题,提出了基于Monte-Carlo方法的效率分析模型,并通过实验数据验证其可靠性。通过该模型分析了粒径大小、电场气流速度、电晕电压、两极间距、粒子浓度等因素对收尘效率的影响规律,结果表明:基于Monte-Carlo方法的仿真结果精度更高,能有效预测静电除尘器的收尘效率,对于改进静电除尘器设计具有一定的理论意义和实用价值。     

Synthesis of hybrid carbon nanotubes using Brassica juncea L. application to photodegradation of bisphenol A

Hyperaccumulators contain tubular cellulose and heavy metals, which can be used as the sources of carbon and metals to synthesize nanomaterials. In this paper, carbon nanotubes (CNTs), Cu_0.05Zn_0.95O nanoparticles, and CNTs/Cu_0.05Zn_0.95O nanocomposites were synthesized using Brassica juncea L. plants, and the ultraviolet (UV)-light-driven photocatalytic degradations of bisphenol A (BPA) using them as photocatalysts were studied. It was found that the outer diameter of CNTs was around 50 nm and there were a few defects in the crystal lattice. The synthesized Cu_0.05Zn_0.95O nanocomposites had a diameter of around 40 nm. Cu_0.05Zn_0.95O nanocomposites have grown on the surface of the CNTs and the outer diameter of them was around 100 nm. The synthesized hybrid carbon nanotubes using B. juncea could enhance the efficiency of photocatalytic degradation on BPA. The complete equilibration time of adsorption/desorption of BPA onto the surface of CNTs, Cu_0.05Zn_0.95O nanoparticles, and CNTs/Cu_0.05Zn_0.95O nanocomposites was within 30, 20, and 30 min, and approximately 14.9, 8.7, and 17.4 % BPA was adsorbed by them, respectively. The combination of UV light irradiation (90 min) with CNTs, Cu_0.05Zn_0.95O nanoparticles, and CNTs/Cu_0.05Zn_0.95O nanocomposites could lead to 48.3, 75.7, and 92.6 % decomposition yields of BPA, respectively. These findings constitute a new insight for synthesizing nanocatalyst by reusing hyperaccumulators.